J.B.D.S. Power

USG-4S - Uryu . Jbds Power provide all Uryu models if you required kindly connect with us . if you

Detect errors in screw fastening in real time with high accuracy by counting the pulse of the motor.
 Misplaced screws of different type or length, recessed screws or floating screws due to seized cables are now detected.
 Direct teaching allows a simple setting
 Display panel indicates qty of the screws needed to be fastened.
 Installed serial port (RS-232C) makes it possible to set the driver by remote control and record pulse values of each screw tightening for traceability

[Features]
-Every time you tighten with the set torque value, the preset number of tightening counts down.
 When all tightening is completed, the digital value becomes "0".
-Since it spins when the set torque value is reached, anyone can tighten the screw with an accurate value.
-The bit is replaceable.
-Ideal for managing the number of machine screws tightened for automobile parts, home appliances, light electrical product assemblies, etc.
-The cord length (curl part) is 30 cm.
 Accuracy is guaranteed to be ± 3% or 1 scale.
-Can be used in both left and right directions.
[Applications]
-Ideal for tightening machine tools, machine tool blades, and other machine screws with low torque.
-Used for work where overtorque is strictly prohibited, such as smartphones and tablet PCs.

Tip tool mounting size: H6.35

Capacity standard screw O/D: 2.6 to 3.5 mm

Capacity bolt O/D: 2.6 to 3.5 mm

No load speed: 1500 rpm

Air consumption:  0.2 m3/min

Air pressure: 0.6 MPa

Air hose inner O/D: 6.35 mm 

Overall Length: 229 mm

Weight: 735 g

EDP No.: 311034 

Item PKG (mm): 250 x 80 x 60