J.B.D.S. Power

Sentry Portable Bollard GP48-Y-KIT, With Cap & 17' Chain, Yellow, 2/PKA versatile portable bollard available for a wide variety of uses, indoors and out. Bollard is 48" high, tapers from 5" x 5" (125 x 125mm), with a 14" (355mm) diameter round base. Each side of the post has a 2.5" x 20" (63 x 500mm) inset available to place reflective tape or other signage. This water-tight hollow unit can be filled with ballast to increase stability or can be attached with fasteners into a floor, dock, or any other flat base. Guard Post's removable top is designed to work with plastic chain for traffic control. The top allows for chain to pass-through with a slot and a round opening for chain attachment options. The cap is easily removed to provide access into the post. Ballast such as sand or water can be added or removed through the top.

Specification:

 

• APPLICATION: Indoor/Outdoor
• HEIGHT INCHES: 48
• POST CONSTRUCTION: Plastic
• DESCRIPTION: Portable Bollard With Cap & 17' Chain
• WIDTH INCHES: 16
• COLOR FINISH: Yellow
• CONSTRUCTION: Plastic
• OUTSIDE DIAMETER INCHES: 14
• TYPE: Kit
• POST HEIGHT INCHES: 48
• POST COLOR: Yellow
• BASE DIAMETER INCHES: 14

MODEL JBDS 220

DIAMETER: 194MM

HEIGHT: 700mm

Voltage 230V ± 10%; 50 - 60 Hz
Thermal protection 130°
Absorption and capacitor 1,4 A
Power and speed 0,13 kW
Operating cycle  1,500 manoeuvres a day
Working temperature - 20° + 60°
Degree of protection IP 67
Working time 9 sec.
 Lubrication oil bath
Manual manoeuvre tends to lower spontaneously

With power supply off